This morning I finished the upgrade of my cell cluster to a larger set of "wave guides" and at 05.30 I could posses my sole impatience no longer and shot out of bed straight down to the garage (boy it was cold but who cares) and low and behold the sealant that maintains the water tight integrity of the unit had cured ( I sat the assembly on the boiler overnight to keep it warm) and It was ready to go. I filled the outer case with the old purified water BP (£4.89p a gallon) from the last set up, filtering it through a cofee filter paper in a funnel first, and topped it up with the fresh remaining Purified water BP, all that was needed now was to re connect it to the existing system (With the addition of a suitable bifilar coil) which I did, and fire it up.
Well Big might be beautiful (I`m six foot one and that couldn`t be further from the truth) but I should have known not to fill the container up so far as I did, thinking that the production might not be as I expected and I might get away with it , which as can be seen I didnt.
The Wave guides are too long for this container but I just had to try them out before I designed and built the next container (the materials for which I already have in stock)
I switched it on and having not ajusted the PWM from the old setting . The alternator stopped the Two Horsepower 240v ac electric motor ( my surrogate car engine for now) dead, so mad panic over! (I adjusted the PWM and reluctantly off she went again, I call her "she" now as I have breathed life into her).
Boy does "she" generate Hydroxy I can`t hold my finger over the outlet hole and the froth is everywhere, which confirms that with another five of these "wave guides" I can rule the world :o)) More to come!!!! Tee Heee "I`m really stoked" :o))))))).
If you look carefully You will see an old "Wave Guide" alongside the new set in the container? Whammo!!!!!! the new ones are about 3 to 4 times the effective length. Boy do they produce!!!!!! Tee Heeeeee!!!! Chuckleeeeeee!
In the fore ground you will also see a "mother" of a capacitor and a small inductance coil which I will be using for my, "Car Plasma Spark plug set-up" along with an invertor and a load of diodes.
Bye for now, watch this space! More tests to come when I have conditioned these "wave guides".
3 comments:
dancerA BIG congratulations to you!!
I think....it's all a bit Greek to me PWC ??? wave channels ??
But it does sound like from your enthusiasm that you have turned the corner on this thing.
Omedetou !!!
Mata ne
Liz
How did that darn dancer get in there ?? Guess she's happy, too.
Hi-ya Liz always good to hear from you! hows the dogies? "She" is because I "breeved" life into her, Tee hee! Sure I`ve turned a corner but there is a never ending series of them to come I`m sure! I guess it dont hurt to be enthusiastic particularily when you have the attention span of a fruit fly like I do :o((
Post a Comment