As few people read my posts now I shall remain selfish, and keep batting on about my projects. The photo above is a copy of the Stanley Meyer AX8 circuit board. I have yet to comission it and get it working fully as the two Leds are US but other than that I am pleased with my efforts both making the circuit board cabinet and installing the components.
The large round grey thing is a Variac which takes 240vac in and will vary it from 0 to 275 volts AC the silver thingies on Brackets with yellow connectors are a C38M SCR a sort of switching thrysistor and to the left without the white wire is a IN1188 diode! these control the pulsing to the Voltage intensifier circuit ( the two wires passing through a hole in the dack board below the heatsink shelves of the diodes) the round green things are capacitors which raise and store the voltage (briefly smothing it) the gold thingy is a wire wound resistor!and the small black things four of one size and two of another are IC`s (chips) including an opto-coupler (for fast switching) the white smaller one and a 555 timer the other smaller one adjacent to the capacitors.
Now if this thing works properly it wont be long before I can run my house Furnace /boiler on the results! I should be that lucky (And why not? somebody has to do something about the energy crisis at the moment and a few of us, too few, are doing exactly that) Wish me luck, and given the time on this Earth I will be successfull, when who knows but I will be!
2 comments:
Go Robin Go!! I for one sure hope your inventions work out, I would love to be using this kind of technology.
So would I Rhianna! its a long up hill struggle. But daily we are moving forward. If I ever get it working this site will be the first to know! all my failures have been on here, so its only fitting, if/when I have a success I should publish it! always good to hear from you Rhianna! take care! Hugs Rob
Post a Comment